The Black 30

So after about an hour and a half I finished building my Gherkin kit. For those of you who don’t know, a Gherkin kit is a 30/35% Ortholinear kit that you can use to build your own keyboard.

When I first posted about getting hold of a kit I also mentioned that I’d make a guide for building said kit as I was unable to find a perfect guide on building a Gherkin, however while I was building said keyboard I didn’t take as many pictures as I’d have liked and don’t have the resources to make a tutorial that flows well. The video I used as a rough guide was an archived live stream from the channel The Board Podcast. On the same channel I used a guide for flashing the Pro-Micro that is installed with the Gherkin to actually turn it into a usable keyboard.

If anyone gets there hands on one of these kits and would like some help feel free to get in touch and I’ll do my best to help out. Below I’ll add the rest of the pictures from while I was building.

PCB with the diodes soldered on.
Pro Micro posts added to the back of the board, ready to add the pro micro later on.
Added the 4 corner switches to mount the top plate.
All the switches added to the board and soldered in. Once the switches are attached you can then solder the Pro Micro on the bottom.
The finished build on my desk next to Hello Kitty.

 

Water

After getting bored from doing my homework I’ve decided to have another crack and making something interesting in Photoshop. After more rum that I’d like and a couple of headaches, I finished on this.

Water

There are a few things that I don’t like about it, mainly how the light seems to shrink on the pavement and how there’s no reflection of the lamp post in the water, but other than that I’m pleased with how it turned out. I did try to make a 3D model of this in Blender but it just wasn’t sitting right with me. You can see that attempt in the header image for this post.